Global Industrial Automation Parts Supplier

ABB TZIDC V18345-2020521001 Valve Positioner with LP10BB10010 Pneumatic Actuator Assembly

BrandABB
Models
V18345-2020521001 + LP10BB10010
ConditionBrand New & Genuine Original
WarrantyAt least 1 year (subject to quotation)
DeliveryIn Stock
100% New & OriginalGenuine products only
At Least 1 Year WarrantyReliable after-sales support
Worldwide ShippingFast and safe delivery
Technical SupportProduct selection & application

Product Overview

ABB TZIDC V18345-2020521001 Valve Positioner with LP10BB10010 Pneumatic Actuator Assembly is a requested industrial automation combination comprising a TZIDC digital electro-pneumatic valve positioner and an ABB LP-series pneumatic actuator. The combined purchasing reference is V18345-2020521001+LP10BB10010.

This listing is intended for model-specific replacement enquiries and industrial project sourcing. ABB confirms that LP linear pneumatic actuators can be supplied with TZIDC digital positioners. However, the exact combination reference shown here has not been independently confirmed as a standard factory assembly. Mounting compatibility, configuration and supply scope must be verified before ordering.

ABB TZIDC V18345-2020521001 with LP10BB10010 – Assembly Overview

Industrial pneumatic control systems often combine a positioner with an actuator to regulate the movement of a final control element. The positioner receives a command from the control system and adjusts the pneumatic output to support the requested mechanical position. The actuator converts pneumatic energy into movement for the connected equipment.

The ABB TZIDC family is designed for digital electro-pneumatic positioning applications. The manufacturer describes the TZIDC as an electronically configurable positioner with communication capability for installation on linear or rotary actuators. Its broader product family supports conventional industrial process-control applications.

ABB also describes the LP family as linear pneumatic actuators used for dampers, inlet vanes, louvers, lever-operated valves and other final control elements. The manufacturer’s LP product information confirms that TZIDC digital positioners are available as an actuator-mounted option.

For this particular enquiry, the positioner reference is V18345-2020521001 and the requested actuator reference is LP10BB10010. Although the positioner reference appears in industrial product catalogues, the exact actuator suffix and combined assembly configuration require confirmation from the original equipment documentation.

The two references should be preserved together in the enquiry so that a supplier can identify the intended package. Buyers should not assume that the assembly includes mounting brackets, feedback linkages, pneumatic tubing or additional control accessories unless these items are explicitly stated in the quotation.

Component Identification and Requested Model

Item Reference Description
1 V18345-2020521001 ABB TZIDC digital electro-pneumatic valve positioner
2 LP10BB10010 Requested ABB LP pneumatic actuator reference; exact configuration to be verified
Assembly V18345-2020521001+LP10BB10010 Customer-requested positioner and actuator combination
Important: This combined reference is a sourcing description, not a verified ABB factory assembly code. Confirm both nameplates, mechanical fit, pneumatic configuration, accessories and any required documentation before publication as a stocked or ready-to-install assembly.

Assembly Features and Configuration Considerations

Digital Positioning

The ABB TZIDC product family supports electronically configurable pneumatic positioning. The actual installed options depend on the full positioner ordering code.

LP Pneumatic Actuation

The ABB LP actuator family is associated with movement of industrial final control elements. The exact actuator arrangement must be checked against the application.

Mechanical Integration

Correct mounting hardware, feedback linkage and actuator movement are essential to the operation of a complete positioning assembly.

Replacement Identification

Full nameplate information helps distinguish a requested combined assembly from a standalone positioner or standalone actuator.

Industrial Applications

Positioner and actuator assemblies may be used in industrial facilities where automated mechanical positioning is required. The examples below relate to the broader equipment categories rather than a verified application rating for this exact combined reference.

Power Generation

Power-generation facilities may use pneumatic actuators for regulating dampers, louvers and other process equipment. The required travel, output and control arrangement must be matched to the installation.

Chemical and Process Plants

Industrial process facilities may require electro-pneumatic positioning for regulating equipment. Environmental conditions, mechanical compatibility and applicable approvals should be reviewed before equipment selection.

Industrial Air and Utility Systems

Airflow management and utility equipment may use actuator-mounted positioners for controlled mechanical movement. The complete control loop should be evaluated rather than selecting components solely by appearance.

How to Select the Correct ABB Positioner and Actuator Assembly

Step 1 – Verify Both Nameplates

Confirm the positioner reference V18345-2020521001 and the actuator reference LP10BB10010 from the original equipment. Provide clear photographs of both nameplates and any existing assembly identification labels.

Step 2 – Confirm Mechanical Compatibility

Check the actuator mounting arrangement, mechanical feedback linkage and connection to the driven equipment. An ABB TZIDC positioner being compatible with the LP product family does not prove that every specific positioner and actuator combination is interchangeable.

Step 3 – Review Pneumatic and Control Requirements

Record the required control signal, available instrument-air supply and operating behavior. Verify the actuator’s required travel and output using the correct manufacturer documentation.

Step 4 – Define the Supply Scope

Specify whether the order requires two separate components, a mechanically assembled package or a tested and configured unit. Ask whether mounting kits, linkages, air fittings and other accessories are included.

Step 5 – Request a Written Quotation

Send the full combination reference, quantity, delivery destination and required documentation. Confirm availability, product condition, lead time, warranty and configuration before placing an order.

Why Choose Wuhan Yuli Automation?

Wuhan Yuli Automation Technology Co., Ltd. is an independent industrial automation supplier based in Wuhan, China. We support international sourcing enquiries for ABB pneumatic actuators, digital valve positioners and industrial replacement equipment.

Customers can request individual components or a complete positioner-and-actuator combination. Our team can help coordinate model-specific enquiries through independent supply channels and clarify the requested equipment and commercial terms.

Wuhan Yuli Automation is not an authorized ABB distributor and is not affiliated with ABB. Brand names and part numbers are used for product identification only. Visit our industrial automation website for related products.

For manufacturer information, consult the official ABB TZIDC positioner page and the official ABB LP pneumatic actuator page.

Frequently Asked Questions

Is V18345-2020521001+LP10BB10010 an ABB factory assembly code?

The exact combined reference has not been verified as an official ABB factory ordering code. It is used here to describe the requested positioner and actuator combination.

Can I buy V18345-2020521001 separately?

The TZIDC positioner can be requested as a separate sourcing item. Specify whether you need the standalone positioner or the combined assembly.

Does the package include mounting hardware?

Mounting hardware and linkage inclusion must be confirmed in the quotation. Do not assume that all accessories are supplied with the two main components.

Is the assembly ready for installation?

Assembly, calibration and testing status are not established by the combined model reference. Request written confirmation of the supplied condition and required commissioning work.

How can I request an accurate quotation?

Send both model numbers, quantity, original nameplate photographs and delivery destination. Include any required mounting or accessory details.

Request a Quote

Need ABB V18345-2020521001 with LP10BB10010?

Contact Wuhan Yuli Automation to confirm the requested combination, availability and quotation terms.

Email: sales@wuhanyuli.com

REQUEST A QUOTE →

Key Features

  • Product-specific technical information
  • Model and compatibility verification
  • Replacement and spare-parts sourcing
  • Quotation and logistics support

Typical Applications

  • Industrial process automation
  • Power and energy facilities
  • Chemical and petrochemical plants
  • Water and environmental systems
  • Pulp and paper operations

Can't Find the Product You Need?

Send us your model numbers and requirements.
We'll provide a quotation and availability quickly.

Request a Quote →

ABB TZIDC V18345-2020521001 Valve Positioner with LP10BB10010 Pneumatic Actuator Assembly

ABB TZIDC V18345-2020521001 digital valve positioner with requested LP10BB10010 pneumatic actuator assembly. Suitable for model-specific industrial replacement and project sourcing enquiries. Contact Wuhan Yuli Automation to confirm mechanical compatibility, mounting accessories, configuration, assembly status and availability.

SKU: V18345-2020521001 + LP10BB10010 Category: Brand:
Scroll to Top