StoneL Eclipse EN96 AS-Interface Valve Communication Terminal EN96C02RA EN96D02RA EN96C05RA EN96D05RA

StoneL EN96C02RA is a model reference in the StoneL Eclipse EN96 AS-Interface Valve Communication Terminal family. This WooCommerce variable product includes four requested references: EN96C02RA, EN96D02RA, EN96C05RA and EN96D05RA. The Eclipse EN96 platform combines valve position feedback and AS-Interface communication functions for compatible industrial automated valve installations.

StoneL Eclipse communication terminals are intended for integration with suitable field networks and valve actuator assemblies. They can help connect valve status information and control outputs to an industrial automation architecture. Before purchasing, the complete ordering code, network compatibility, electrical connections and installation requirements must be verified.

StoneL EN96C02RA Eclipse AS-Interface Valve Communication Terminal

Industrial facilities often operate large numbers of automated valves. These valves may control flow, isolate equipment or support operating sequences in a production process. Reliable communication between the field devices and the control system is therefore an important consideration when designing an automation network.

AS-Interface, commonly abbreviated as AS-i, is an industrial communication system used to connect compatible sensors and actuators. An AS-i valve communication terminal can consolidate relevant field signals into a networked device instead of relying entirely on separate point-to-point wiring arrangements.

The StoneL Eclipse EN96 belongs to the manufacturer’s AS-Interface communication terminal range. Manufacturer literature identifies the EN96 function as having two discrete position sensor inputs, two auxiliary discrete inputs and two solenoid power outputs. These are family-level functional characteristics and do not replace the need to review the installation manual for the complete ordered device.

When maintaining an existing installation, buyers should compare the full StoneL part number rather than relying on photographs alone. Products with similar housings may use different communication protocols or connection arrangements. In particular, an EN96 AS-i terminal should not be treated as directly interchangeable with an EN92 DeviceNet unit.

Available StoneL Eclipse EN96 Models

Four ordering references are included in this product listing. Each model should be created as a separate WooCommerce variation with its own SKU. The table preserves the supplied part numbers without assigning unverified mechanical dimensions or approval ratings.

Ordering Note: These four complete references should be checked against the original nameplate, manufacturer ordering records or an authorized technical response. Their listing together does not establish that the different suffixes are mechanically or electrically interchangeable.

EN96 Technical Information

The following information describes the EN96 AS-Interface function published in StoneL Eclipse EN/EG manufacturer literature. It is provided as a product-family reference rather than a substitute for a model-specific datasheet.

Electrical output limits, wiring assignments, enclosure ratings and site-specific approvals must be confirmed against the applicable manufacturer manual. A technician should also check the installed AS-i master and network configuration before commissioning a replacement.

Key Features and Functions

AS-Interface Field Communication

The EN96 family supports AS-i communication in compatible valve automation networks. This makes it relevant to facilities using AS-Interface for field-level monitoring and control. Actual commissioning depends on the network controller, address assignment and device configuration.

Valve Position Feedback

The EN96 function includes two discrete position sensor inputs. These can be used within a compatible actuator monitoring arrangement to communicate valve-related status information. The exact signal interpretation depends on the installed equipment and network configuration.

Auxiliary Input Capability

Manufacturer documentation also identifies two auxiliary discrete inputs in the EN96 function. Their intended use must be evaluated against the actual field wiring and control system requirements. Installation personnel should consult the applicable technical manual rather than assuming universal compatibility.

Solenoid Output Function

The EN96 communication terminal provides two power outputs intended for compatible solenoid valve applications. Electrical load limits and the required wiring arrangement must be checked before connecting equipment. Output capability should not be inferred solely from the enclosure appearance.

Compact Eclipse Construction

The Eclipse product family uses a compact valve-mounted format. This arrangement can be useful where field space is limited and equipment identification is important. The actuator mounting interface and any required accessories should be confirmed for the complete ordered model.

Industrial Applications

StoneL Eclipse EN96 communication terminals may be relevant to compatible automated valve systems in oil and gas processing, petrochemical plants, chemical manufacturing, power generation, water treatment, pulp and paper, and industrial utility facilities.

AS-i networks can be used to connect suitable field devices to a plant automation system. Within a valve installation, this may support monitoring of operating states and communication of selected control commands. The actual available functions depend on the installed terminal and network design.

For classified hazardous locations, the complete product must be checked against the applicable approval documents and nameplate markings. A general statement about the Eclipse family does not establish that every individual ordering reference has the same certification.

StoneL EN96 Model Selection Guide

Step 1: Confirm the communication protocol. Verify that the existing automation system uses AS-Interface. Do not replace an EN92 DeviceNet terminal with an EN96 AS-i unit without an engineering review of the entire interface.

Step 2: Record the complete model number. Check whether the original product is EN96C02RA, EN96D02RA, EN96C05RA or EN96D05RA. Record all characters exactly as shown on the nameplate.

Step 3: Check the network configuration. Confirm the AS-i master, addressing requirements and installed device parameters. An EN96 standard-addressing unit should not automatically be treated as equivalent to an EN97 extended-addressing terminal.

Step 4: Review the field connections. Compare the original cable arrangement, terminal connections, solenoid requirements and actuator mounting provisions with the proposed replacement.

Step 5: Verify the installation environment. Review ambient conditions, enclosure requirements and any hazardous-location approval obligations using the complete manufacturer’s documentation.

Step 6: Confirm commercial availability. Request a quotation with the exact model number, required quantity, destination country and preferred delivery schedule. Include an original product photograph when available.

Why Choose Wuhan Yuli Automation?

Wuhan Yuli Automation Technology Co., Ltd. supplies industrial automation components for customers in international markets. Our portfolio includes valve position monitors, valve communication terminals, valve positioners, industrial controllers, communication modules and power supply equipment.

We focus on new and original products with a minimum one-year warranty under our standard sales commitment. Our team can assist with model identification, sourcing inquiries, quotation preparation and international order coordination.

Explore Wuhan Yuli Automation’s industrial automation product website for related valve monitoring and process control equipment.

For official product-family information, visit the Valmet StoneL AS-Interface products page and the StoneL Eclipse EN/EG technical brochure.

Frequently Asked Questions

What is StoneL EN96C02RA?

StoneL EN96C02RA is a supplied ordering reference associated with the Eclipse EN96 AS-Interface Valve Communication Terminal family. Its complete configuration should be checked against manufacturer records before purchase.

What is the difference between EN96 and EN92?

EN96 is associated with AS-Interface communication, while EN92 is associated with DeviceNet. The two network protocols require different system compatibility checks and should not be considered direct substitutes.

How does EN96 differ from EN97?

EN96 uses standard AS-i addressing, while EN97 is the extended-addressing family. The correct selection depends on the existing network and the manufacturer’s device configuration.

Are EN96C02RA and EN96D02RA interchangeable?

Interchangeability has not been established. Buyers should verify the complete ordering code, electrical connections, mechanical arrangement and required approvals.

What is the difference between EN96C05RA and EN96D05RA?

These are distinct supplied ordering references. Their exact configuration differences should be confirmed through the manufacturer or original equipment documentation rather than inferred from the suffix alone.

How can I request an EN96 quotation?

Contact Wuhan Yuli Automation with the complete StoneL model number, required quantity and delivery destination. A clear nameplate photograph can help verify an existing installation.