The ABB TU810 S800 I/O Module Termination Unit is a module termination unit (MTU) designed for the ABB S800 I/O system. It provides the termination and mounting interface used with supported S800 I/O modules, helping connect field wiring to the modular I/O architecture of industrial automation and distributed control systems.
Wuhan Yuli Automation Technology Co., Ltd. supplies industrial automation components for international purchasing inquiries, including ABB S800 I/O equipment, module termination units, controllers and communication hardware. Contact our team for TU810 product identification, availability, lead time and a formal quotation.
ABB TU810 S800 I/O Module Termination Unit Overview
The ABB S800 I/O system uses modular hardware to connect process signals and industrial control equipment. Module termination units are important elements of this architecture because they provide the physical termination interface associated with compatible electronic I/O modules.
The ABB TU810 is an MTU within the S800 I/O product family. It is used as part of the module installation and field connection arrangement. Its exact suitability depends on the selected I/O module, system design and approved hardware combination.
Unlike a controller or electronic I/O module, a termination unit serves a different role within the assembly. Buyers should distinguish the TU810 from the active I/O module that connects to it.
For maintenance teams, the correct MTU helps preserve the intended module installation and wiring arrangement. When replacing existing equipment, it is important to identify both the termination unit and its associated I/O module.
The TU810 should be selected according to the original ABB S800 I/O documentation. Customers should not assume that every S800 I/O module uses the same MTU or that all TU-series termination units are interchangeable.
Providing the complete TU810 reference, existing module identification and photographs of the original assembly can help clarify a spare parts purchasing inquiry.
ABB TU810 Technical Information
| Item | Information |
|---|---|
| Manufacturer | ABB |
| Model | TU810 |
| Product Family | S800 I/O |
| Product Type | Module Termination Unit (MTU) |
| Primary Role | I/O module termination and field wiring interface |
| System Application | Compatible ABB S800 I/O installations |
| Compatible I/O Modules | Verify against ABB module/MTU compatibility documentation |
| Condition | Confirm with quotation |
| Availability | Subject to stock confirmation |
Technical note: This overview intentionally avoids unverified terminal counts, channel ratings, electrical limits, physical dimensions and specific module compatibility claims. For installation or replacement, consult the applicable ABB S800 I/O technical documentation.
ABB TU810 Features and Functions
S800 I/O Module Termination
The TU810 belongs to the S800 I/O termination hardware range. Its role is to provide the interface associated with a compatible electronic I/O module and the corresponding field wiring arrangement.
Correct selection of the MTU helps ensure that the physical module installation follows the intended ABB system architecture. The associated I/O module must be identified separately.
Field Wiring Interface
Industrial control systems require defined connections between field signals and electronic I/O equipment. An MTU forms part of the termination arrangement for those connections.
Actual wiring assignments and allowable electrical characteristics depend on the specific module combination. These details must be confirmed using the relevant ABB documentation.
Modular System Architecture
The S800 I/O family uses modular components to support industrial control installations. Termination hardware and electronic modules perform complementary functions within the system.
When preparing a replacement order, buyers should distinguish the TU810 termination unit from the active I/O module and other mounting or communication accessories.
Exact Model Identification
The TU810 designation helps maintenance teams specify the intended MTU when requesting replacement parts. Customers should also check any additional product identification or revision markings on the original assembly.
Similar model names within the TU series should not be treated as proof of interchangeability. Always verify the original equipment requirements.
Maintenance and Spare Parts Support
Industrial facilities may maintain spare termination units to support planned maintenance and replacement projects. Accurate product identification can simplify communication between engineering and purchasing departments.
For an efficient inquiry, provide the required quantity, associated I/O module, destination country and any available photographs of the original unit.
Industrial Applications of ABB S800 I/O Termination Hardware
ABB S800 I/O systems are used in industrial automation environments where modular input and output hardware connects process equipment to control systems.
Industrial sectors that use distributed control and I/O equipment include power generation, oil and gas, chemical processing, water treatment, pulp and paper, mining and general manufacturing.
These examples describe typical industrial automation environments rather than specific approvals for every TU810 installation. The actual suitability of the termination unit depends on the approved module combination and operating conditions.
For an established control system, maintenance personnel should identify the installed I/O module, termination hardware and applicable wiring documentation before selecting a replacement.
When a facility requires a spare MTU, the purchasing department should record the exact model and any associated hardware references. Engineering personnel should confirm technical suitability before installation.
ABB TU810 Selection and Purchasing Guide
Step 1: Verify the Complete MTU Model
Confirm that the original termination unit is marked TU810. Record any additional assembly numbers, revision information or identification markings.
Step 2: Identify the Associated S800 I/O Module
Check which electronic I/O module is installed with the termination unit. The appropriate MTU depends on the supported module and system configuration.
Step 3: Review the Original Documentation
Consult ABB technical information for the selected module and termination unit. Verify the applicable wiring arrangement, installation requirements and module compatibility.
Step 4: Confirm the Product Condition
Specify whether new original equipment is required. Request confirmation of the exact offered model, included accessories, packaging and warranty terms.
Step 5: Request a Formal Quotation
Send TU810, the required quantity, destination country and preferred delivery schedule. Confirm actual stock, price, lead time and shipping terms before ordering.
Why Choose Wuhan Yuli Automation?
Wuhan Yuli Automation Technology Co., Ltd. is an industrial automation trading company established in 2017. We support international customers with sourcing inquiries for industrial control equipment and spare parts.
Our product range includes ABB DCS and PLC equipment, communication modules, I/O components, industrial power supplies and termination hardware.
Our standard commercial offering focuses on new, original products with at least a one-year warranty, subject to confirmation in the final quotation. Product availability, condition and delivery arrangements should be confirmed for each order.
Explore more industrial control components and related I/O equipment at Wuhan Yuli Automation. For official manufacturer information and technical resources, visit the ABB website.
Customers can request a quotation for TU810 together with associated S800 I/O modules and other identified spare parts. Providing complete model references helps improve purchasing accuracy.
Frequently Asked Questions
What is the ABB TU810 Module Termination Unit?
The ABB TU810 is an MTU within the S800 I/O product family. It provides termination hardware associated with supported electronic I/O modules and their field wiring arrangements.
Is TU810 an I/O module or a termination unit?
TU810 is a module termination unit. It should be distinguished from the active electronic I/O module installed as part of the S800 I/O assembly.
Which S800 I/O modules are compatible with TU810?
Compatibility depends on the specific module and system configuration. Check the ABB S800 I/O documentation for the approved module/MTU combination.
Can TU810 replace TU811 or TU830?
Interchangeability should not be assumed. Each MTU reference must be checked against the original equipment requirements and ABB compatibility documentation.
Is TU810 suitable for DCS applications?
TU810 is part of the ABB S800 I/O hardware range used in industrial control installations. Its suitability depends on the selected modules and the overall system architecture.
Can I request a new original ABB TU810?
Yes. Customers can submit an inquiry for new original equipment. Actual availability, condition and delivery time are subject to quotation confirmation.
What information is required for a TU810 quotation?
Provide TU810, required quantity, associated I/O module information, shipping destination and any additional identification markings.
Request a Quote – ABB TU810
ABB TU810 S800 I/O Module Termination Unit
Looking for TU810 for an ABB S800 I/O installation? Contact Wuhan Yuli Automation for product identification, availability confirmation and a formal quotation.
Please include: TU810, quantity, associated S800 I/O module and destination country.
Email: sales@wuhanyuli.com
