ABB DP Series Double Acting Pneumatic Actuators are offered for industrial valve automation sourcing, maintenance planning and replacement enquiries. This variable product covers 18 requested model references, including DP007DA, DP020DA, DP110DA, DP665DA, DP1800DA and DP8000DA.
The DP series is associated with pneumatic actuation for industrial valve operation. A double-acting configuration uses compressed air as part of the driving arrangement in both operating directions. Exact model specifications, available torque, supply pressure, mounting dimensions and included accessories must be confirmed against the appropriate manufacturer documentation.
ABB DP Series Double Acting Pneumatic Actuators – Overview
Pneumatic actuators convert compressed-air energy into mechanical motion to operate industrial equipment. In valve automation, an actuator is normally selected according to the valve’s required movement, operating torque, available air supply and installation conditions. The actuator and valve must be considered as a complete mechanical system.
Double-acting pneumatic operation generally uses air pressure to drive the actuator in both directions. This differs from a spring-return arrangement, where a mechanical spring contributes to the operating response. The final system behavior during loss of air pressure depends on the complete pneumatic circuit and should not be assumed from the DA suffix alone.
The ABB DP references on this page are organized as individual purchasing options. They should not be treated as interchangeable sizes. Model selection must be based on verified manufacturer information and the actual valve duty rather than on the numerical portion of a model number.
Depending on the application, an actuator installation may require a solenoid valve, valve positioner, limit switch box, air filter regulator or mounting kit. The complete scope of supply should be stated in the quotation. Accessories shown in a reference photograph are not necessarily included with a bare actuator.
Complete ABB DP Double Acting Actuator Model List
All 18 supplied model references are listed below. Each reference can be entered as a separate WooCommerce variation using the exact model as its SKU. The table is intended for sourcing and identification, not as confirmation of factory inventory or model-specific performance.
| No. | Model / SKU | Requested Product |
|---|---|---|
| 1 | DP007DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 2 | DP012DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 3 | DP020DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 4 | DP035DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 5 | DP050DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 6 | DP075DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 7 | DP110DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 8 | DP160DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 9 | DP255DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 10 | DP435DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 11 | DP665DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 12 | DP1000DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 13 | DP1200DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 14 | DP1800DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 15 | DP2700DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 16 | DP3800DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 17 | DP5700DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
| 18 | DP8000DA | ABB DP double-acting pneumatic actuator – configuration to be confirmed |
Features and Configuration Considerations
Double-Acting Operation
The requested DA models belong to a double-acting purchasing group. Confirm the pneumatic control arrangement and required movement before selecting a unit.
Valve Automation Integration
Actuator selection depends on the valve’s mechanical requirements. Mounting interfaces, coupling details and the required operating torque must be checked.
Control Accessories
Solenoid valves, positioners, feedback switches and air preparation equipment may be specified separately. Confirm which components are included.
Replacement Identification
Original nameplate photographs and installation drawings can help distinguish similar DP models and reduce the risk of ordering an unsuitable replacement.
Industrial Applications
Pneumatic valve actuators are widely used in industrial facilities where remotely controlled or automated valve movement is required. The following are potential application areas for this product category. Actual suitability must be checked for each DP model and valve assembly.
Oil and Gas
Process valve installations may use pneumatic actuation. Environmental conditions, control requirements and applicable project specifications must be reviewed.
Chemical Processing
Automated valve systems may require pneumatic actuators to support process operations. Compatibility depends on the valve and complete installation.
Power Generation
Utility and process-control equipment may incorporate pneumatically actuated valves. Correct actuator sizing and control integration are essential.
Water and Industrial Utilities
Automated valve arrangements can support fluid-handling and utility operations. Valve torque, mounting and operating conditions should be verified.
ABB DP Pneumatic Actuator Selection Guide
Step 1 – Identify the Exact Model
Record the full model reference from the existing equipment. For example, DP007DA, DP075DA and DP8000DA are distinct purchasing references. Include photographs of the actuator nameplate and any accessory labels when requesting a quotation.
Step 2 – Confirm Valve Requirements
Determine the valve type, required operating torque and mechanical movement. Check whether the existing installation uses a particular coupling or mounting arrangement. A visually similar actuator should not be assumed to fit the same valve.
Step 3 – Review Air and Control Conditions
Provide the available instrument-air conditions and required control method. State whether the project requires on/off operation, modulating control or position feedback. Confirm the behavior expected during air-supply failure.
Step 4 – Specify Accessories
Identify any required solenoid valve, positioner, limit switch box, air filter regulator, tubing or mounting kit. Ask the supplier to confirm whether these accessories are included with the offered assembly.
Step 5 – Confirm the Commercial Offer
Send the exact model number, required quantity, delivery destination and requested schedule. Review the quotation for product condition, warranty, documentation, availability and delivery terms. Compare alternatives only after technical compatibility has been established.
Why Choose Wuhan Yuli Automation?
Wuhan Yuli Automation Technology Co., Ltd. is an independent industrial automation supplier based in Wuhan, China. We support international sourcing enquiries for pneumatic actuators, industrial control products and replacement components.
Customers can submit one DP model or a consolidated list of actuator references for quotation. Our team can coordinate model-specific enquiries through an independent supplier network and help clarify quantities, equipment identification and commercial requirements.
We source genuine industrial products through independent supply channels. Wuhan Yuli Automation is not an authorized ABB distributor and is not affiliated with ABB. Brand names and model references are used for identification purposes only.
Explore our industrial automation product website for related equipment. For manufacturer information, visit the official ABB website and request the appropriate DP-series technical documentation for your exact model.
Frequently Asked Questions
What does DA mean in DP007DA?
DA identifies the requested double-acting configuration. The exact pneumatic circuit and operating behavior must be confirmed for the complete assembly.
Can DP020DA replace DP035DA?
Interchangeability has not been established. Confirm torque requirements, mounting details, coupling dimensions and control configuration before considering any replacement.
Does DP160DA include a solenoid valve?
The model reference alone does not establish the accessory package. Specify the required solenoid valve and ask for written confirmation of the included components.
Can I request DP1000DA and DP2700DA together?
Yes. Include both exact model numbers and their individual quantities in one enquiry. Nameplate photographs and drawings can help identify the required equipment.
Are DP5700DA and DP8000DA available?
This page is a model-based sourcing catalogue, not a live stock guarantee. Availability, lead time and product condition must be checked for each model.
How can I verify the correct actuator?
Provide the original nameplate, valve information and installation requirements. Have the responsible engineer confirm technical compatibility before installation.
Request a Quote
Looking for ABB DP Series Double Acting Pneumatic Actuators?
Send your model number, quantity, destination and original nameplate photograph. Wuhan Yuli Automation can review your sourcing enquiry and prepare a quotation subject to model verification and availability.
Email: sales@wuhanyuli.com
